Supported Software - Intel System Board G4H875-B User Manual

Intel g4h875-n/g4h875-c/g4h875-b system board user's manual

Table of Contents

4.1.2 Using the DMI Utility

Award DMI Configuration Utility Copyright Award Software Inc, 1996

[Edit DMI] [Add DMI] [Load DMI File] [Save DMI File]

    

BIOS

    

System

Enclosure/Chassis

Processor

Memory Controller

Memory Module

Cache

Port Connector

    

System Slots

Move cursor

The four menus located on top of the DMI Configuration Utility screen

are Edit DMI, Add DMI, Load DMI File and Save DMI File. Use the

(left or right) arrow keys to select a menu from the Menu

bar.

On the left side of the screen is a list of the system configuration items.

Use the

The commands at the bottom of the screen will allow you to navigate

through the various setup menus.

Edit DMI

1. Use the

2. Highlight the item on the left screen that you would like to edit

by using the

3. The cursor will move to the screen you select allowing you to edit

information. The screen will also display the auto-detected

information.

4. Press <F10> to update the edited information into the flash ROM.

*** BIOS Auto Detect ***

Type : BIOS Information

Handle : 0000

Vendor Name :

BIOS Version :

BIOS Starting Address Segment : E000

BIOS Build Date :

BIOS Characteristics :

Size of BIOS ROM : 0256K

ENTER-Accept

DEL-Delete

(up or down) arrow keys to select an item.

arrow keys to select the Edit DMI menu.

arrow keys, then press <Enter>.