Operating Instructions; Using The Surface Units; How To Set; Dual Surface Unit Control Knob - GE JCSP42 Owner's Manual

Using the surface units.

Throughout this manual, features and appearance may vary from your model.
Be sure you turn the control
knob to OFF when you finish
cooking.
6

How to Set

Push the knob in and turn in either
direction to the setting you want.
At both OFF and HI the control clicks into
position. You may hear slight clicking sounds
during cooking, indicating the control is
keeping the power level you set.
A HOT SURFACE indicator light, on the
cooktop, will glow when any radiant element
is turned on. It will remain on until the
surface is cooled to approximately 150°F.
Hot surface indicator light will:
I
come on when the unit is hot to the touch.

Dual Surface Unit Control Knob

The right front surface unit has 2 cooking sizes to
select from so you can match the size of the unit to
the size of the cookware you are using.
To use the small (6 inch) surface unit, turn
the control knob to the SMALL settings.
To use the large (9 inch) surface unit, turn
the control knob to the LARGE settings.
I
stay on even after the unit is turned off.
I
glow until the unit is cooled to approximately 150°F.
The WARM setting on the right REAR surface
unit keeps already heated food warm until
ready to serve. Do not use to heat cold food.