JP6: BIOS Write Protect
JP6 can be used to protect the BIOS from being overwritten due to
accidental modification or virus attacks.
JP9, JP10: CPU Overclocking
Use JP9 and JP10 2-pin jumpers when overclocking the CPU bus speed
from 66MHz to 100MHz or 100MHz to 133MHz. Refer to the table
below. Note that some processors cannot be overclocked because their
bus speed has been 'locked' by the manufacturer and overclocking can
cause the system to hang or become unstable.
Jumper
JP9
JP10
JP6
Normal
66à100MHz
I815E User' s Manual
INSTALLATIONS
Write Protect
Disabled
Enabled
100à133MHz
11