Digital Effect; Displaying The Digital Effect Screen - Kenwood DDX7025 Instruction Manual

Digital Effect

(with the optional accessory DSP unit connected only)
You can set up the Digital Effect.
Displaying the Digital Effect
screen
D i g i t a l E f f e c t
Digital Effect screen
3
M e n u
PCM C e n t e r
Audio
Set Up
2
D o l b y P r o L o g i c
SRC
1
B i P h a n t om
Dynam i c R a n g e
D i g i t a l E f f e c t
8
D e f e a t
4
4
On O f f
5
5 On O f f
6
6
On O f f
7 O f f 7
On
1 Returns to the Control screen of the previous
source.
2 Calls the Setup Menu. (see page 47)
3 Calls the Sound Effects Menu.
4 PCM Center
If you set to "On", a sound is output from the center
speaker.
5 Turns the Dolby Pro Logic function on or off.
6 Turns the Bi Phantom function on or off.
If you set to "On", the signal of the center channel is
controlled so that it can be exactly positioned.
7 Sets up the dynamic range when the Dolby Digital
sound is used.
If you set to "On", it compresses the dynamic range
to control loud sounds.
8 The DSP unit settings return to default.
• The Dolby Pro Logic and PCM Center functions
are effective when the 2ch PCM signal is used.
• You cannot set up "Bi Phantom" when "Dolby Pro
Logic" is "Off".
• You cannot set up "PCM Center" when "Dolby Pro
Logic" is "On".
English 83