Tone Curve Setup - Kenwood DDX7025 Instruction Manual

Tone curve setup

You can set a Tone curve.
1 Display the Tone setup screen
To n e
Tone setup screen
To n e
FREQ
1
B a s s
Le v e l
2
M i d d l e
Q F a c t o r
3
T r e b l e
4
B a s s DC EXT
1 Bass adjustment items are displayed.
2 Middle adjustment items are displayed.
3 Treble adjustment items are displayed.
4 Bass DC Extend settings
If turned "On", it extends the bass center
frequency to the low register by approximately
20%.
5 Returns to the Equalizer screen.
Tone curve can be set for each source.
2 Select a frequency band you wish to adjust
B a s s
You can adjust the following frequency bands.
Bass: 60, 70, 80, 100/150 (When "Q Factor" is
"2.00") Hz
Middle: 500, 1k, 1.5k, 2k Hz
Treble: 10k, 12.5k, 15k, 17.5k Hz
Set a center frequency
3
FREQ
4 Set a level
Level
80
- 5
1 . 0
O f f
5
Re t u r n
M i d d l e T r e b l e
5 Set a Q factor
Q Factor
You can set it up only when Bass or Middle is
adjusted.
6 Close the Tone setup screen
R e t u r n
English 79