Intel D845GBV Product Manual page 8

Intel Desktop Boards D845GRG and D845GBV Product Guide
Table 1. Feature Summary (continued)
LAN (optional)
Peripheral Interfaces
Expansion Capabilities
BIOS
Power Management
Hardware Management
✏
NOTE
For information about Intel
updates, and device drivers, go to the Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop/
8
• Intel
®
82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device and
RJ-45 connector
• Up to six USB 2.0 ports
— Four ports routed to the back panel
— Two ports routed to the front panel USB header
• Two IDE interfaces with Ultra DMA-33 and ATA-66/100 support
• One diskette drive interface
• One parallel port
• Two serial ports (one via a board header)
• PS/2
†
keyboard and mouse ports
• Desktop Board D845GRG:
— Three PCI bus add-in card connectors
— One AGP connector
— One optional Communication and Networking Riser (CNR) connector
(slot shared with PCI bus connector 3)
• Desktop Board D845GBV:
— Six PCI bus add-in card connectors
— One AGP connector
 One optional CNR connector (slot shared with PCI bus connector 6)
• Intel/AMI BIOS
• 4 Mbit symmetrical flash memory
• Support for SMBIOS
• Support for Advanced Configuration and Power Interface (ACPI)
• Suspend to RAM (STR) support
• Wake on USB, PCI, CNR, RS-232, PS/2, LAN, and front panel
Hardware monitor with:
• Two fan sensing inputs used to monitor fan activity
• Remote diode temperature sensing
• Voltage sensing to detect out of range values
®
desktop boards, including technical product specifications, BIOS