Boot Device Priority Submenu; Hard Disk Drives Submenu - Intel D845GBV Product Manual

Boot Device Priority Submenu

Maintenance
The submenu represented in Table 24 is for setting boot devices priority.
Table 24.

Boot Device Priority Submenu

Options
Feature
• Removable Device
st
1 Boot Device
• Hard Drive
nd
2 Boot Device
• ATAPI CD-ROM
rd
3 Boot Device
• Disabled

Hard Disk Drives Submenu

Maintenance
The submenu shown in Table 25 is for setting hard disk drives.
Table 25.

Hard Disk Drives Submenu

Feature
st
1 Hard Disk Drive
(Note)
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.
Main Advanced
Description
Specifies the boot sequence from the available devices. To specify
boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
• Removable Device (maximum of four).
• Hard Drive (maximum of 12).
• ATAPI CD-ROM (maximum of four).
Main Advanced
Options Description
Dependent on installed Specifies the boot sequence from the available hard disk
hard drives drives. To specify boot sequence:
1.
2.
Using the BIOS Setup Program
Security Power
Security Power
Select the boot device with <↑> or <↓>.
Press <Enter> to set the selection as the intended
boot device.
Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
59