Table of Contents
Advertisement
5
Exit the V-Chip setting mode
Press the MENU button on the remote control to
enter the setting and exit the screen.
CHANGE ACCESS CODE
To change access code, follow the steps.
1
Select "V-CHIP SET UP"
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to select "V-
CHIP SET UP".
Then, press the F.FWD/B button.
2
Enter Access code
Use the number on the remote con-
trol to enter the access code.
Note: The default code is 0000.
3
Select "CHANGE CODE"
Press the PLAY/K or STOP/L but-
ton to select "CHANGE CODE".
Then, press the F.FWD/B button.
4
Enter New code
Use the number buttons to enter
your desired access code in the
NEW CODE space. Then enter
the same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
•
If you enter wrong code, repeat step 4, making
sure you enter the same new code exactly in the
confirm code space.
This TV/VCR will operate with any cassette that has the
recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the TV/VCR. The
TV/VCR will automatically turn on.
Window
CORRECT
Press the MENU button on the remote control to exit
the screen.
Note: If you unplug the power code or power failure
occurs, the changed access code will be lost and will
return to default (0000). Change your access code
again as necessary.
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
TV RATING
MPAA RATING
B CHANGE CODE
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
PLAYBACK
PRECAUTIONS
•
•
•
WRONG
•
- 17 -
5
Exit the V-Chip setting mode
mark. For best results, we
Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or visa versa. Before using a tape with
these conditions, to avoid damage of the tape and
your TV/VCR, wait until the tape has warmed to
room temperature and the moisture has evaporated.
Avoid extreme heat, high humidity and magnetic
fields from speaker systems.
Do not tamper with the cassette mechanism.
Do not touch the tape with your fingers.
EN
9I03
Advertisement
Table of Contents
