C Tv Operation; Watching A Tv Program; Game Mode; Degaussing - Sylvania SRC2213E Owner's Manual

WATCHING A TV PROGRAM

1
Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
2
Select the channel number
Press the CHANNEL K or L button to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed must be selected
on the cable box or satellite box.
3
Adjust sound
Press the VOLUME X X or Y Y button
to adjust the volume.

GAME MODE

This function enables you to decrease the TV screen
contrast and making it suitable for use with a Video
game system.
NOTE: This function CANNOT be set during
recording.
Press the GAME button on the
remote control. "GAME" appears
on the screen.
When you press the GAME button;
•
The TV/VCR turns on automatically.
•
The TV/VCR will select front A/V input mode
automatically.
TO CANCEL THE GAME MODE
Press the GAME button or CHANNEL K or L but-
ton on the remote control.

DEGAUSSING

This television has a degaussing circuit that will clear
up color errors on the TV screen that are caused by
any excess magnetism which happens to get too close
to the TV. This circuit is designed to operate once
when the set is first plugged in. If minor color errors
are seen in some locations on the screen, please
unplug the TV for approximately 15 minutes. When
the TV is plugged back in, the degaussing circuit will
operate once to clear them up. Repeat this procedure
any time the TV screen is accidentally magnetized, or
when the TV is moved or relocated.
TV OPERATION
The TV/VCR's picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
•
Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
•
When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
•
TV/VCR power must be turned on.
1
Select "PICTURE CONTROL"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "PICTURE CON-
VOLUME 20
C C C C C
C C C C C C C
TROL".
Then, press the F.FWD/B button.
2
Select item you want to adjust
Press the PLAY/K or STOP/L button until desired
control is displayed.
BRIGHT
CONTRAST
COLOR
GAME
TINT
SHARPNESS
3
Adjust the picture control
Press the F.FWD/B or REW/s button to adjust to
your desired level.
BRIGHT
CONTRAST
COLOR
TINT
SHAPNESS
•
If there is a power failure of any kind, the unit will
retain its setting.
- 14 -

PICTURE CONTROL

Arrow Button {
to decrease
brightness
to decrease
contrast
to pale
to purple
to soft
– M E N U –
TIMER PROGRAMMING
B PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
BRIGHT
– P P P P P P P P P P P P P P C C P P P P P P P P P P P P P P +
Arrow Button B
to increase
brightness
to increase
contrast
to brilliant
to green
to clear
EN
9I03