Table of Contents
Advertisement
•
When the REC/OTR button is pressed 18 times,
the TV/VCR returns to the Normal Recording
mode.
•
To stop the OTR operation, press the STOP button
on the TV/VCR or on the remote control.
•
To show the remaining time, press the DISPLAY
button on the remote control so that "OTR"
appears on the TV screen. (It will show up
momentarily then disappear.)
•
Recording stops when 0:00 is reached.
•
Please note that in the SLP mode maximum
recording time, assuming the tape is started at the
beginning, is 8 hours using T-160 (or 6 hours using
T-120).
•
If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, eject the tape and turn itself off.
1
Select the channel to be recorded
Press the number buttons on the remote control or
the CHANNEL K or L button.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3
or CH4, then the channel to be recorded is selected
on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape
speed (SP/ SLP).
3
Begin OTR
Press the REC/OTR button on the
TV/VCR as many times as needed.
The recording length will be deter-
mined by the number of times you
press the REC/OTR button. Each
additional push will increase the recording time by
30 minutes. It is set up to 8 hours.
Push(es)
Display
1 push
(continuous recording)
2 pushes
0:30
3 pushes
1:00
4 pushes
1:30
17 pushes
8:00
TIMER RECORDING
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
Make sure ...
•
•
•
•
•
Avoid overlap of programs ...
There is a chance that a program will not be record-
ed. When programs overlap:
•
•
•
OTR(2 : 30)
SP
Press the MENU button on the
remote control.
Confirm "TIMER PROGRAM-
Recording length
MING" is pointed to by pressing
the PLAY/K button.
30 minutes
Ppress the F.FWD/B button.
60 minutes
•
90 minutes
480 minutes
Press the PLAY/K or STOP/L but-
ton to select the desired program
position.
Then, press the F.FWD/B button.
- 21 -
DATE:
July 5th, 2002
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:
SP
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4
to match the output channel of the box.
Clock is set to the correct time and date before set-
ting the timer.
TV/VCR power is turned on to program it.
To insert a cassette tape with its erase prevention
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.)
To set the channel you want to record
The program with the earliest start time will record
first.
Once the earliest program finishes recording, the
overlapping programs will record in the order of
the program number.
The illustration below demonstrates the sequence
of recording.
Recording Sequence
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
9:00AM
10:00AM
*Recording period is SHADED
1
Select "TIMER PROGRAMMING"
If you have not yet set the clock, "MANUAL
CLOCK SET" appears. If so, follow stops [3] to
[8] on page 11. Then set the timer recording.
2
Select your desired program
position (1~8)
11:00AM
12:00PM
– M E N U –
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
B - -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
- -
-/- - - - - -:- -
-:- - - -
EN
01A11
Advertisement
Table of Contents
