C Recording; Normal Recording; Skipping Unwanted Scenes During; Recording - Sylvania W6313CC Owner's Manual

TWO DIFFERENT TAPE SPEEDS
Before recording, select the tape speed from : SP mode
(Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play-
back time using T60, T120 or T160 tapes in each mode.
Tape Speed Recording/Playback Time
Type of tape T60
SP mode 1 hour
SLP mode 3 hours
Note: You can play back a tape recorded in LP mode
(Long Play).
Make sure ...
•
TV/VCR power is turned on.
•
Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.

NORMAL RECORDING

You can ONLY watch the same TV program that is
being recorded.
1
Select the channel to be recorded
Press the number buttons on the
remote control or the CHANNEL
K or L button.
Remember: If the TV/VCR is con-
nected to a cable box or satellite
box, the TV/VCR must be on CH3
or CH4, then the channel to be recorded must be
selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select
the desired tape speed (SP/ SLP).
3
Begin recording
Press the RECORD button.
4
Stop recording
Press the STOP button when recording is completed.

RECORDING

ERASE PREVENTION
You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.
T120 T160
2 hours 2-2/3 hours
If you decide to record on
the tape again, cover the
6 hours 8 hours
hole with plastic tape.
SCENES DURING RECORDING
Press the PAUSE/STILL button to
temporarily stop recording.
Press the PAUSE/STILL or
RECORD button to resume record-
ing.
CH 10
NOTES:
•
•
This function enables you to set a recording length
simply by pressing the REC/OTR button on the
SP
TV/VCR.
Make sure ...
•
REC
•
SP
NOTES:
•
•
- 20 -
SKIPPING UNWANTED
After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape dam-
age.
If "CLOSED CAPTION (ON)" is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.

OTR (One Touch Recording)

TV/VCR power must be turned on.
Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)
This function CANNOT be done from the remote
control.
Recording starts immediately when the REC/OTR
button is pressed.
Tab
Plastic Tape
PAUSE
SP
EN
01A11