Programming Recordings With The Video Plus+ System - Philips VideoPlus DVDR75 Operating Instructions Manual

Timer
VIDEO Plus+ system
PlusCode number
- - - - - - - - -
Mo-Fr/Weekly
Press SELECT
64
Programming recordings with the VIDEO
Plus+ ®
Thanks to this programming system, you no longer need to tediously enter the date, programme
number, start and end time. All the information needed by the DVD recorder for programming
is contained in the PlusCode programming number. This 9-digit PlusCode number is found in
most TV listings magazine.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming method selected last is marked.
3
Select 'VIDEO Plus+ system' using
confirm with C .
4
Enter the entire PlusCode number. This number is up to 9 digits long
and can be found next to the start time of the TV programme in your
TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode number.
If you make a mistake, you can clear your instructions with CLEAR .
Selecting daily/weekly recordings
Using SELECT , select from the following options:
'Mo-Fr': Repeated daily recordings (Monday to Friday).
'Weekly': Repeated weekly recordings (every week on the same day).
To store
Press OK
5
Confirm with OK .
a The following message appears on the screen: 'VIDEO Plus+
system'
b The programme number of the TV channel has not yet been assigned to
the PlusCode number. Use C , D or the number buttons 0..9 on the
remote control to select the appropriate programme number (name) of the
TV channel and confirm with OK .
a The following message appears on the screen: 'PlusCode number
wrong'
b The entered PlusCode number is incorrect. Correct your entry or cancel
using the SYSTEM-MENU button.
b Check the time/date (see 'Setting the time & date' in 'Installing your DVD
recorder').
a The following message appears on
programming not possible'
b A daily recording was entered for the wrong day. Daily programming can
only be used for recordings to be made from Monday to Friday.
System
Programming a recording (TIMER)
CH- B or CH+ A and
the screen: 'Weekend
Problem
Tip