Black Balance Adjustment - Panasonic AW-E300SP Operating Instructions Manual

Adjustments

$ Black balance adjustment

This adjustment is performed when using the camera for the first time, when the camera
has not been used for a prolonged period or when the lighting conditions have changed,
causing the white balance to change significantly which in turn has caused the black
balance to alter.
OClose the lens before proceeding.
OIf the black balance is set when using the camera by itself, the setting for the R (red)
and B (blue) gain adjustment using Painting will return to ±0. (The Painting settings
are valid only in the user mode.)
When performing the adjustment
using the camera
The black balance is set in about 10
seconds when the YES/ABC switch is
held down for two or more seconds.
After the black balance has been set,
the black balance can be finely adjusted
by varying the R pedestal and B
pedestal using Painting on the color set
sub-menu in the user mode.
When performing the adjustment
using the RCU (RCB)
The black balance is set when the auto
set switch is set to "ABC." The AUTO
LED flashes while the black balance is
being set.
The AUTO LED goes off to indicate a
successful completion of the setting, and
it lights to indicate a failed setting
procedure. Repeat
procedure in the latter case.
YES/ABC switch
the setting
23
Camera
OPTION CARD
MENU
ITEM/AWC
YES/ABC
+
NO/BAR
–
RCU (RCB)
PAINTING
AUTO/ATW
GAIN
R B
ATW
TOTAL
A
B
AUTO
PED
R B
AWC
HOLD
ABC
Auto set switch
AUTO LED
VIDEO OUT
I/F REMOTE
G/L IN
IRIS
DC12V IN
PED