Advanced Adjusting Individual Speaker Levels; Features Using The Dvd Analog Multichannel Input; Connecting Components - Integra DTR-4.5 Instruction Manual

Advanced Operation—Continued
On Standby
V 1 V 2
1 2
Multi CH
Multi CH
4 5
CD Tape
7 8
+ 10
0
--/---
Input Selector
Macro
1 2
Remote Mode
Receiver Receiver
DVD
Tape
TV VCR
Dimmer
TV
Input
Rec
Audio Subtitle
Surround All ST
Repeat A-B
Direct
CH SEL
Test Tone CH SEL
Open/Close Video Off
RC - 587 M
Adjusting Individual Speaker Levels
You can adjust the level of individual speakers during
playback. These adjustments are temporary and will be
cancelled when the AV receiver is set to Standby.
1
Press the [Receiver] button, use
the [CH SEL] button to select
Receiver
each speaker, and use the
[Level–] and [Level+] buttons to
adjust the volume.
Speakers are selected in the following
CH SEL
order: Front Left
→
Right Surr Right
Subwoofer.
You can adjust the volume of each
Level - Level +
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
Notes:
• You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
T V
I Input
V 3
+
3
TV CH
DVD
-
6
Tuner
9
TV VOL
Clear
3
Zone 2
CD MD/CDR
Cable SAT
Sleep
Angle Last Memory
Stereo
Search Memory
DSP DSP
Level- Level+
Level – +
L Night Cine Fltr
→ →
Center Front
→ →
Surr left
Using the DVD Analog Multichannel
Input
The DVD analog multichannel input is for connecting
components with a 5.1-channel analog audio output,
such as a DVD player or MPEG decoder.
See "Using a Multichannel Connection" on page 28 for
connection information.
1 Press the [Receiver] button fol-
lowed by the [Multi CH] button so
Receiver
that "MCH" appears on the dis-
play.
Multi CH
Notes:
• To use the bass and treble functions with the DVD
analog multichannel input, select the Multich listening
mode first.
Adjusting Individual Speaker Levels
You can adjust the level of individual speakers while
using the DVD analog multichannel input.
1 Use the remote controller's [CH
SEL] button to select each
CH SEL
speaker, and then use the
[Level–] and [Level+] buttons to
adjust the volume.
The level can be adjusted from –12 to
+12 dB (–30 to +12 dB for the sub-
Level - Level +
woofer).
Notes:
• These speaker level settings are completely indepen-
dent of those explained on pages 42 and left column.
• While the DVD analog multichannel input is selected,
you can only select the Direct or Multich listening
mode. If you select the DVD analog multichannel
input while using another listening mode, that listen-
ing mode will be cancelled.
• While the DVD analog multichannel input is selected,
the Speaker Configuration settings on page 39 is
ignored, and signals from the multichannel input are
fed to the front left, front right, center, surround left,
and surround right speakers, and subwoofer regardless
of those settings.
53