Connecting To A Dolby Digital Decoder (For Dvd) - Sylvania 6719DF Owner's Manual

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a
DOLBY DIGITAL Data stream from its AUDIO OUT COAXIAL jack. By hooking the unit up to a Dolby
Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround
sound as enjoyed in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
Center
speaker
Front speaker
(left)
Dolby Digital
decoder
Surround
speaker
(left)
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the unit.
•
If connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "BITSTREAM" for audio output in the
setup mode. (Refer to page 43.)
•
Unless connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "PCM" for audio output in the
setup mode. Playing a unit using incorrect settings may generate noise distortion and may also damage the
speakers. (Refer to page 43.)
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Front speaker
ANT.
(right)
To Coaxial digital
Audio input jack
Subwoofer
Surround
speaker
(right)
- 14 -
(IN) Audio coaxial digital cable
(commercially available)
(OUT)
AUDIO OUT
COAXIAL
To AUDIO OUT
COAXIAL jack
(Only DVD AUDIO OUT)
[Fig. 7]
EN