Table of Contents
Advertisement
CONNECTING TO A DOLBY DIGITAL DECODER
If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround or DTS
surround format, the TV/DVD/VHS outputs a Dolby Digital or DTS data stream from its COAXIAL digital
audio out jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convinc-
ing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can
be heard in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio connections.
Center
speaker
Front speaker
(left)
Dolby Digital
or DTS decoder
Surround
speaker
(left)
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VHS.
•
If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
•
If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
•
Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for
audio output in the setup mode. Playing a TV/DVD/VHS using incorrect settings may generate noise distor-
tion, and may also damage the speakers.
•
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
OR DTS DECODER (for DVD)
Front speaker
(right)
To COAXIAL DIGITAL
AUDIO INPUT jack
Subwoofer
Surround
speaker
(right)
- 14 -
1
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D
symbol are trademarks of Dolby
Laboratories. Confidential Unpublished
Works. ©1992-1997 Dolby Laboratories, Inc.
All rights reserved.
"DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
L
AUDIO OUT
R
COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
[Fig. 8]
EN
1F12
Advertisement
Table of Contents
