Operation - DeWalt DCF889-XE Instruction Manual

SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
COMPONENTS (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Trigger switch
B. Forward/reverse button
C. Anvil
D. Main handle
FIG. 2
C
G
A
E
F
INTENDED USE
This impact wrench is designed for professional impact fastening applications. The
impact function makes this tool particularly useful for driving fasteners in wood, metal
and concrete. DO NOT use under wet conditions or in presence of flammable liquids
or gases.
These heavy-duty impact wrench/drivers are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when inexperienced
E. Battery release button operators use this tool.
F. Battery pack

OPERATION

G. Worklight
H. Detent pin (Fig. 6)
reverse button in the lock-off position or turn tool off and disconnect battery pack
before making any adjustments or removing/installing attachments or accessories.
Installing and Removing the Battery Pack (Fig. 3)
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (F) into the tool handle, align the battery pack with the rails
inside the tool's handle and slide it into the handle until the battery pack is firmly
seated in the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release button E) and firmly pull
B
the battery pack out of the tool handle. Insert it into the charger as described in the
charger section of this manual.
D
8
WARNING: To reduce the risk of serious personal injury, place the forward/
FIG. 3
E
F
FIG. 4
I