This may significantly reduce the exposure level over the total working period. Technical Data Identify additional safety measures to protect the operator from the effects of DCF889-XE vibration such as: maintain the tool and the accessories, keep the hands warm, Voltage organisation of work patterns.Safety Instructions FOR POWER TOOLS...
Page 4
GENERAL POWER TOOL SAFETY WARNINGS f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of WARNING! Read all safety warnings and all instructions Failure to follow electric shock.
Electrical Safety c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, The electric motor has been designed for one voltage range only. Always check that or storing power tools. Such preventive safety measures reduce the risk of the power supply corresponds to the voltage on the rating plate.
• Air vents often cover moving parts and should be avoided. Loose clothes, CAUTION: When not in use, place tool on its side on a stable surface where it jewellery or long hair can be caught in moving parts. will not cause a tripping or falling hazard. Some tools with large battery packs will •...
• Never force the battery pack into the charger. Do not modify the battery pack • If battery contents come into contact with the skin, immediately wash area with in any way to fit into a non-compatible charger as battery pack may rupture mild soap and water.
• Pull by the plug rather than the cord when disconnecting the charger. This will FIG. 1 Charging Procedure (Fig. 1) reduce the risk of damage to the electric plug and cord. 1. Plug the charger into an appropriate outlet before •...
4. If the battery pack does not charge properly: HOT/COLD DELAY a. Check operation of receptacle by plugging in a lamp or other appliance; This charger has a hot/cold delay feature: when the charger detects a battery that is hot, it automatically starts a delay, suspending charging until the battery has cooled. b.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR INTENDED USE This impact wrench is designed for professional impact fastening applications. The FUTURE REFERENCE impact function makes this tool particularly useful for driving fasteners in wood, metal and concrete. DO NOT use under wet conditions or in presence of flammable liquids COMPONENTS (FIG.
Page 11
Always use proper hand position as shown. For more information regarding fuel gauge battery packs, please call 1800 444 224 (Aust) or 0800 339 258 (NZ) or visit our website www.dewalt.com.au or www. WARNING: To reduce the risk of dewalt.com.nz .
WARNING: Never use solvents or other harsh chemicals for cleaning the CAUTION: Ensure fastener and/or system will withstand the level of torque non-metallic parts of the tool. These chemicals may weaken the plastic materials generated by the tool. Excessive torque may cause breakage and possible personal used in these parts.