Preparing The Power Supply - Sony Cyber-shot DSC-P1 Service Manual

1
2
3
4
5
6
7
8
9
A Finder
Self-timer/recording lamp (red)
AE lock lamp (green)
Strobe charge lamp (orange)
B
(flash) button
C
(MACRO) button (43)
D PROGRAM AE button (43)
E VOLUME +/– button
F LCD ON/OFF button
Set to OFF to save the battery
when using the finder.
G LCD screen
H Control button
Charging the battery pack
You cannot charge the battery pack while your camera is turned on. Be sure to turn
off your camera before charging.
Battery pack (S series)
Jack cover
AC-LS1A AC power adaptor
1
Insert the battery pack into your camera.
2
Open the jack cover and connect the DC connecting cable to the
DC IN jack of your camera with the v mark facing up.
3
Connect the power cord (mains lead) to the AC power adaptor and
then to a wall outlet (mains).
The battery indicator in the display window flashes when charging begins.
When the battery indicator stops flashing, normal charge is completed. For
full charge, which allows you to use the battery longer than usual, leave the
battery pack inserted for about one hour after normal charge is completed until
the battery remaining indicator and "FULL" is displayed alternately in the
display window.
After charging
Remove the AC power adaptor.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Charging at a room temperature of 50°F to 86°F (10°C to 30°C) is recommended.
Attaching the wrist strap
0
qa
qs
qf
qd
qj qg
qk
qh
ql
I Speaker
J DISPLAY button
K Zoom button
L Hook for wrist strap
M A/V OUT jack (50)
Audio output is monaural.
N Battery eject lever (8)
O Battery/"Memory Stick" cover
P Access lamp (14)
Q USB jack (mini-B) (26) (27)
R Jack cover
S DC IN jack (9) (11)
7
To the wall outlet (mains)
Power cord
(mains lead)
9

Preparing the power supply

Installing the battery pack
Your camera operates only with the "InfoLITHIUM" NP-FS11 battery pack* (S
series). You cannot use any other battery pack.
1
Open the battery/"Memory Stick" cover.
Slide the cover in the direction of the arrow.
2
Install the battery pack.
Insert the battery pack with the B mark facing toward the battery compartment
as illustrated.
3
Close the battery/"Memory Stick" cover.
To remove the battery pack
Open the battery/"Memory Stick" cover. Slide the battery eject lever upward,
and remove the battery pack.
Be careful not to drop the battery pack when removing it.
* What is "InfoLITHIUM"?
"InfoLITHIUM" is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
"InfoLITHIUM" battery pack (S series). "InfoLITHIUM" S series battery packs have the
mark. "InfoLITHIUM" is a trademark of Sony Corporation.
8
NP-FS11 battery pack
When you record images in an extremely cold location or using the LCD screen, the
operating time becomes short. When using the camera in an extremely cold location,
place the battery pack in your pocket or other place to keep it warm, then insert the
battery pack into the camera just before recording. When using a pocket heater, take
care not to let the heater directly contact the battery.
Charging time
Battery pack
NP-FS11 (supplied)
Approximate time to charge a completely discharged battery pack using the AC-
LS1A AC power adaptor.
Battery life and number of images that can be recorded/played back
STILL mode recording*
LCD screen ON
LCD screen OFF
STILL mode playback**
LCD screen ON
Approximate battery life and number of images that can be recorded/played back
with a fully charged battery pack at a temperature of 77°F (25°C), 640×480 image
size and in NORMAL recording mode. Numbers in parentheses indicate the time
when you use a normally charged battery pack.
∗ Recording at about 4-second intervals
∗∗ Playing back single images in order at about 3-second intervals
MOVIE mode recording
Continuous recording
Approximate time that can be recorded with a fully charged battery pack at a
temperature of 77°F (25°C) and 160×112 image size. Numbers in parentheses
indicate the time when you use a normally charged battery pack.
10
1-2
Battery eject lever
Full charge (min.) Normal charge (min.)
180 130
NP-FS11 (supplied)
Battery life (min.) Number of images
70 (65) 1300 (1200)
90 (85) 1700 (1600)
NP-FS11 (supplied)
Battery life (min.) Number of images
105 (100) 2000 (1900)
NP-FS11 (supplied)
LCD screen OFF (min.) LCD screen ON (min.)
110 (100) 85 (75)