Connecting A Computer; Using The Basic Controls; Turning The Tv On And Off; Adjusting The Volume - Insignia NS-LTDVD32-09 User Manual

32" lcd tv/dvd combo
Table of Contents

Advertisement

Available languages

Available languages

Connecting a computer

To connect a computer using VGA:
1 Plug a VGA cable (4) into the VGA port on
the computer (6) and into the VGA INPUT
port on the back of your TV.
2 Plug an audio cable (5) into the audio jack on
the computer (6) and into the AUDIO VGA
INPUT port on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
Caution
The TV will automatically turn off after one minute
if there is no signal in PC mode.
To connect to a computer or other HDMI
device using the HDMI1 jack:
1 Plug an HDMI cable (2) into the HDMI port on
the HDMI device (3) and into the HDMI1
INPUT port on the back of your TV.
2 Turn on your TV.
3 Press INPUT, then press
HDMI1.
To connect to a computer or other HDMI
device using the HDMI2 jack:
1 Plug an HDMI cable (8) into the HDMI port on
the HDMI device (3) and into the HDMI2
INPUT port on the side of your TV.
2 Turn on your TV.
12

Using the basic controls

Turning the TV on and off

Adjusting the volume

Changing the video mode

/
to select PC.
/
to select
www.insignia-products.com
Insignia NS-LTDVD32-09 32" LCD TV/DVD Combo
3 Press INPUT, then press
HDMI2.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
"wake" your computer, press the POWER button
on your TV or remote control.
To turn your TV on and off:
1 Press POWER on the side of your TV or on
the remote control. The POWER/STANDBY
indicator turns blue.
2 To turn off your TV, press POWER again. The
POWER/STANDBY indicator turns red.
You can adjust the volume using the controls on
your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound, then press
this button again to restore the sound.
Your TV supports multiple video modes.
To select the video mode:
Press INPUT one or more times to select the
video mode, then press ENTER. You can
select:
TV
AV1
AV2
S-Video1
S-Video2
Component
DVD
HDMI1
HDMI2
PC (VGA)
/
to select

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents