Connecting A Component Video Device; Connecting A Dolby Digital Decoder - Insignia NS-LTDVD20 User Manual

To connect an standard S-Video device to
AV1 jacks:
1 Plug an S-Video cable (4) into the S-Video
out jack on an S-Video device (1) and into the
S-VIDEO jack (5) on the back of your
TV combo.
2 Plug the RCA audio cables (2) into the
S-Video device audio output jacks and into
the AUDIO L and AUDIO R jacks (1) on the
back of your TV combo.
3 Turn on your TV combo.
4 Press INPUT and the
S-Video.

Connecting a component video device

3
C R / P R Y
COAXIAL C B / P B
INPUT
2
1
To connect a progressive-scan or HDTV
video source to Y/Pb/Pr jacks:
1 Plug a component video cable (2) into the
progressive-scan or HDTV video device (1)
and into the Y/Pb/Pr jacks (3) on the back of
your TV combo.
2 Plug the RCA audio cables (4) into the audio
out jacks on progressive-scan or HDTV video
device and into the lower AUDIO L and
AUDIO R jacks (3) on the back of your
TV combo.
3 Turn on your TV combo.
4 Press INPUT and the
Component.
8

Connecting a Dolby Digital decoder

or to select
AUDIO
L
R
4
or to select
www.insignia-products.com
Insignia NS-LTDVD20 20" LCD TV/DVD Combo
You can connect your TV combo to an amplifier
®
equipped with a Dolby Digital decoder or
processor to listen to DVD audio in surround
sound.
3
C P Y
R / R
COAXIAL C B / P B
INPUT
2
1
Amplifier with Dolby Digial decorder
To connect to an amplifier equipped with a
Dolby Digital decoder:
1 Remove the port cover on the back of your
TV combo.
2 Plug a coaxial cable (2) into the Dolby Digital
jack on the amplifier (1) and into the
COAXIAL OUTPUT jack (3) on the back of
your TV combo.
AUDIO
L
R