Connecting To Video Sources - Insignia NS-20CLTV User Manual

Connecting to video sources

Connecting to an antenna or cable/satellite
receiver
RF
INPUT
2
To connect an external antenna or cable/
satellite receiver:
1 Remove the port cover on the back of
the TV (1).
2 Connect the antenna terminal from an
antenna or cable/satellite receiver (3) to the
antenna input jack on the TV (2).
3 Press the INPUT button and the
buttons to set the TV's signal input to TV.
8
1
VGA AUDIO
VGA INPUT OUTPUT
INPUT
www.insignia-products.com
Insignia NS-20CLTV 20" Combo DVD/LCD TV
Connecting to a standard video source
Your TV supports multiple video source inputs.
For temporary or easy-access video
connections, use the side jacks (AV2). For more
permanent connections, use the rear jacks
(AV1).
1
2
3
4
3
5
To connect a standard video source to
AV1 jacks:
1 Connect an RCA video cable (2) to a
standard video source (1) and the back
VIDEO jack (5).
2 Connect RCA audio cables (4) to the
source's audio output jacks and the upper
AUDIO L and R jacks on the back panel (5).
3 Press the INPUT button and the
buttons to set the TV's signal input to AV1.
To connect a standard video source to
AV2 jacks:
1 Connect an RCA video cable (6) to a
standard video source (1) and the side
VIDEO jack (8).
2 Connect RCA audio cables (7) to the
source's audio output jacks and the side
AUDIO L and R jacks (8).
3 Press the INPUT button and the
buttons to set the TV's signal input to AV2.
INPUT 1
S-VIDEO R
AUDIO
VIDEO L
INPUT 3
C R / P R
C B / P B L
AUDIO
Y R
6
7
VIDEO
INPUT 2
L
R
AUDIO
8