Setting Up Your Tv; Installing The Remote Control Batteries; Using The Remote Control - Insignia NS-20CLTV User Manual

Insignia NS-20CLTV 20" Combo DVD/LCD TV
Item Description
19 OPEN/CLOSE: Press to eject the disc currently in the
disc slot.
20 AUTO/DPMS: Press to automatically adjust the display
for PC mode video. In other modes, press to turn display
off. (Not available in DVD mode.)
21 MUTE: Press to mute the sound.
22
CH / :Press to skip to the previous or next
channel while in TV mode. In other modes, press to
change to TV mode.
23 TV MENU: Press to open the TV menu. Press again to
exit.
24 ENTER: Press to confirm your selections.
25 FREEZE (pause): In DVD mode, press to pause disc
playback. In other modes, press to freeze the image
being displayed, then press again to resume playback.
26 DVD MENU: Press to open the DVD root menu.
27 STOP: Press to stop DVD and CD playback.
28 Search (fast forward and reverse): Press to play fast
forward or backward during DVD and CD playback.
29 RETURN: Press to return to the previous menu screen.
30 WIDE: Press to change the picture format.
31 ANGLE: Press to change the DVD viewing angle.
32 SETUP: Press to open the DVD Setup menu.
33 REPEAT: Press to repeat DVD playback.
34 SUBTITLE: Press to change the DVD subtitle language.

Setting up your TV

Installing the remote control batteries

To install the batteries:
1 Open the battery compartment on the back of
the remote control.
2 Insert the two supplied AAA batteries into the
battery compartment. Make sure that the (+)
and (-) symbols on the batteries match the
diagram inside the compartment.
+
-
-
+

Using the remote control

To use the remote control:
•
www.insignia-products.com
Point it directly at the TV, within a 30° angle of
the IR sensor on the front of the TV, and
within 20 feet.
Note
Objects between the remote control and the
sensor may weaken the remote control's IR signal.
Range can be diminished by direct sunlight
shining on the TV's IR sensor.
Cautions
Do not expose the remote control to liquids, direct
sunlight, or shock.
The remote control may not work correctly if the
TV's IR sensor is under direct sunlight or strong
lighting. In these cases, change the angle of the
lighting or the TV screen, or operate the remote
control closer to the IR sensor.
7