Setting Up Your Dvd/Tv; Installing The Remote Control Batteries; Using The Remote Control; Connecting To Video Sources - Insignia ns-7utctv User Manual

Setting up your DVD/TV

Installing the remote control batteries

To install the batteries:
1 Remove the battery holder on the bottom of
the remote control.
2 Insert the battery (provided) into the battery
holder. Make sure that the (+) symbol on the
battery matches the diagram on the holder.
3 Reinsert the battery holder into the bottom of
the remote control.

Using the remote control

To use the remote control:
• Point it directly at the TV, within a 60° angle of
the IR sensor on the front of the TV, and
within 23 feet (about 7 meters).
Notes
• The battery normally lasts for about six months,
depending on how often and for what operations
the remote control is used.
• If the remote control fails to work, even when it is
operated near the player, replace the battery.
• If the remote control is not used for a long period of
time, remove the battery from the compartment to
prevent damage from battery leakage.
6
Insignia NS-7UTCTV 7" Under-the-Cabinet DVD/LCD TV

Connecting to video sources

Connecting to a TV antenna
To connect an external TV antenna:
1 Connect the antenna cable to the ANT
INPUT jack on the back of your DVD/TV.
2 Press the TV button on the remote control, or
press the SOURCE button on your DVD/TV
repeatedly, to set your DVD/TV's signal input
to TV.
Connecting to an ATSC (digital) signal source
To connect an ATSC (digital) signal source:
1 Connect the cable from the ATSC source to
the ATSC INPUT jack on the back of your
DVD/TV.
2 Press the DTV button on the remote control,
or press the SOURCE button on your DVD/
TV repeatedly, to set the TV's signal input to
ATSC.
www.insignia-products.com
Note
Objects between the remote control and the
sensor may weaken the remote control's IR signal.
Range can be diminished by direct sunlight
shining on the DVD/TV's IR sensor.
Cautions
Do not expose the remote control to liquids, direct
sunlight, or shock.
The remote control may not work correctly if the
DVD/TV's IR sensor is under direct sunlight or
strong lighting. In these cases, change the angle
of the lighting or the TV screen, or operate the
remote control closer to the IR sensor.
Note
• Do not connect the power cord until all other
connections have been made.
• Each time you restart your DVD/TV, it
remembers the last function used.
• Make all connections before installing your
DVD/TV.
TV signal input
ATSC signal input