Adjusting The Sound - Insignia NS-P42Q-10A User Manual

NS-P42Q-P501Q-P502Q-10A_09-0100_MAN_V1_English.book Page 22 Friday, March 20, 2009 3:11 PM

Adjusting the sound

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
Picture Mode
Contrast
Sound
Brightness
Channel
Sharpness
Color
Setup
Tint (G/R)
Input
2 Press or to highlight Sound, then press
ENTER to access the Sound menu.
Picture
Mode
Sound
Equalizer
Channel
SRS TruSurround HD : Off
Setup
Preferred Language
Input
Multi-Track Sound
Auto Volume
Speaker Select
3 Press or to highlight an option, then press
ENTER to access the option.
Note
You may need to press
You can select:
• Mode—Selects the sound mode. You can
select:
• Standard—Use for general purposes.
• Music—Lets you listen to music as if you
are sitting in a concert hall.
• Movie—Lets you experience movie sound
as if you are sitting in a movie theater.
• Clear Voice—Emphasizes voice over other
sounds. Select this sound mode when
watching news, soap operas, or
documentaries.
• Custom—Lets you customize the sound
settings to suit your personal preferences.
22
: Standard
: 95
: 45
: 50
: 50
: G50/R50
: Custom
: English
: Stereo
: Off
: TV Speaker
to see all the options.
www.insigniaproducts.com
• Equalizer—Sets the equalizer mode. You can
select:
• Mode—Selects the sound mode among
the predefined settings. You can select
Standard, Music, Movie, Clear Voice, or
Custom.
• Balance L/R—Adjusts the balance
between the right and left speaker.
• 100 Hz, 300 Hz, 1 kHz, 3 kHz, and
10 kHz—Adjusts the level of different
bandwidth frequencies.
• Reset—Resets the equalizer settings to
the default values.
• SRS TruSurround HD—If the sound is in 5.1
Surround Sound format, downmixes the
sound to produce Surround Sound quality
audio through your TV's speakers.
• Preferred Language—Selects the language
for a digital TV program, if multiple tracks are
available.
Note
You can also press MTS one or more times to
select the language for a digital program.
• Multi-Track Sound—Selects the audio mode
for an analog TV program. You can select
Mono, Stereo, or SAP (separate audio
program), depending on available audio
formats for the program. If you are having
difficulty receiving stereo audio, select Mono.
Note
You can also press MTS one or more times to
select the analog audio mode.
• Auto Volume—Automatically adjusts the
volume when changing channels. You can
select On or Off.
• Speaker Select—Selects the speakers the TV
sound is played through. You can select:
• External Speaker—Turns the TV speakers
off and plays the sound through the
speakers of a connected amplifier. When
you select this option, the volume and
MUTE buttons on the TV and the TV
remote do not work. You need to adjust
the volume using the amplifier controls.
• TV Speaker—Plays the sound through the
TV speakers.
• Sound Reset—Resets some or all of the
sound settings to the default settings. You can
select:
• Reset All—Resets all the sound settings to
default settings. Press ENTER to reset
sound settings.
• Reset Sound Mode—Resets the current
sound Mode settings to default settings.
For more information, see the Equalizer
option in this step.
• Cancel—Cancels any changes you have
made.
4 Press or to adjust the option, then
press ENTER to confirm.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.