Radio Shack 49-454 Owner's Manual page 15

4. Insert the box into the hole and nail it
to the wall stud or use metal strips
designed for mounting an electrical
box in wallboard. The box should be
recessed slightly behind the surface
of the wall.
5. Connect the wires to the keypad and
the alarm system terminals accord-
ing to the chart in "Connecting the
Keypad to Your Alarm System" on
Page 9.
6. Press the button on the bottom of the
keypad, then remove the keypad's
front cover.
7. Secure the keypad to the box using
the supplied screws. Then replace
the keypad's front cover.
Preparation
15