Installing The Keypad - Radio Shack 49-454 Owner's Manual

INSTALLING THE KEYPAD

Note: Install the keypad indoors away
from dust, dirt, and temperature or hu-
midity extremes.
1. Select a location on the wall that is
not directly over a wall stud. An elec-
tronic wall stud finder is available at
your local RadioShack store.
2. Using a single-gang electrical box as
a template, cut a hole in the wall the
same size as the box.
3. Route connection wires from the
alarm system to the hole (through
the attic, walls, and so on) and
through the knock-out plug in the
electrical box. Leave at least 6
inches of extra wire for connection to
the keypad.
14
Preparation