Installing Optional Ball-Bearing Rail Kit Items; Attaching The Rails To The Server - Asus RS300-E6 Series User Manual

3.2 Installing optional ball-bearing rail kit
items
Your optional ball-bearing rail kit package contains:
• two pair of server rails (for the server)
• two pairs of rack rails (for the rack)
• Nut-and-bolt type screws
Nuts and screws
3.2.1

Attaching the rails to the server

To attach the server rails:
1. Attach the front end of the server
rail to the side of the chassis,
matching each of the three hooks
to the holes on the rail. Then slide
the rail toward the front panel until it
locks in place.
2. Secure the front end of the server
rail to the side of the chassis with
one screw.
ASUS RS300-E6 Series
Rear end Front end Rack rails
3-5