Table of Contents
Advertisement
3.2
Installing optional ball-bearing rail kit
items
Your optional ball-bearing rail kit package contains:
•
two pair of server rails (for the server)
•
two pairs of rack rails (for the rack)
•
Nut-and-bolt type screws
Nuts and screws
3.2.1
Attaching the rails to the server
To attach the server rails:
1.
Attach the front end of the server rail to the side of the chassis, matching
each of the three hooks to the holes on the rail. Then slide the rail toward the
front panel until it locks in place.
2.
Secure the front end of the server
rail to the side of the chassis with
one screw.
ASUS RS700DA-E6/PS4, RS704DA-E6/PS4
Rear end
Front end
Rack rails
3-5
Advertisement
Table of Contents
