Toshiba 19LV505 Owner's Manual page 63

[ Setting details (continued)
• Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at
30
frames per
second). Make this selection according to the type of
content being viewed.
~
EJ
«.P
~. ~
Nighl Mode : Off
Dlgllal Oul : Bilslream
Auto: Select this selection normally.
The DVD player automatically detects
source content, film or video of
playback source, and converts that
signal in an appropriate method.
Film: The DVD player converts film content
pictures appropriately. Suitable for
playback of film content pictures.
Video: The DVD player filters video signal and
converts it appropriately.
Suitable for playback of video content
pictures.
Note:
Depending on the disc, pictures may be cut off or
doubled. In this case, select "Video".
• JPEG Interval
You can continuously playback all JPEG files
automatically.
After the selection below, the disc will start playback on
JPEG files which have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show at
15 second intervals.
• Night Mode
Night Mode enables you to control the dynamic range so as
to achieve a suitable sound for your equipment.
Off: It plays back at the recording level on the disc.
On: Loud sound such as explosion is toned down
slightly when played back. This is suitable when
it is connected to a stereo.
Note:
• This function works only when the disc recorded with
Dolby Digital is played back.
• The level of Night Mode may differ depending on DVD
video disc.
• Digital Out
You can select the digital output sound format corresponding
to your system connection .
Off:
There is no sound output from DIGITAL AUDIO OUT
jack.
PCM:
Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo
amplifier.
Bitstream:
Disc audio bitstream data will be output.
Note:
• Even if you select "Bitstream", MPEG Audio will be output
in PCM format.
•
. "
C
~
(')
-
0 "
~
1/1
!a
c
"'C