Save Configuration To Flash; Restart - LevelOne FBR-1461 User Manual

Adsl2/2+ modem router 1w 4l qos

Hide thumbs Also See for FBR-1461:

Table of Contents

3.4. Save Configuration to Flash

After changing the router's configuration settings, you must save all of the configuration

parameters to FLASH to avoid losing them after turning off or resetting your router. Click

Save to write your new configuration to FLASH. Click Apply to write setting to flash.

Click Restart with option Current Settings to reboot your router (and restore your last saved

configuration).

Select Save Config to Flash and click Restart to take all changes effect

Select Current Settings and click Restart, all changes will discard and restart with last

saved settings.

Factory Default Settings

If you wish to restart the router using the factory default settings (for example, after a

firmware upgrade or if you have saved an incorrect configuration), select Factory Default

Settings to reset to factory default settings.

You may also reset your router to factory settings by holding in the small Reset pinhole

button on the back of your router for 10-12 seconds while the router is turned on.

Table of Contents