Installation; Before Configuration - LevelOne FBR-1461 User Manual

Adsl2/2+ modem router 1w 4l qos

Hide thumbs Also See for FBR-1461:

Table of Contents

2. Installation

You can configure the FBR-1461 router through the convenient and user-friendly interface of

a web browser. Most popular operating systems such as Linux, Mac and Windows

98SE/2000/XP/Me include a web browser as a standard application.

PCs must have a properly installed Ethernet interface and connect to the router directly or

through an external repeater hub. In addition, PCs must have TCP/IP installed and

configured to obtain an IP address through a DHCP server or a fixed IP address that must be

in the same subnet as the router. The default IP address of the router is 192.168.1.254 and

the subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same subnet, and

have an IP address in the range of 192.168.1.1 to 192.168.1.253). The easiest way is to

configure the PC to obtain an IP address automatically from the router using DHCP. If you

encounter any problems accessing the router web interface you are advised to uninstall any

kind of software firewall on your PCs, as they can cause problems accessing the

192.168.1.254 IP address of the router.

Please follow the steps below for installation on your PC network environment. First of all,

check your PC network components. The TCP/IP protocol stack and Ethernet network

adapter must be installed. If not, please refer to your Windows-related or other operating

system manuals.

Table of Contents