Installation - Samsung ACH1800E Service Manual

4. Installation

4-1 Operation of the Remote Controller (Wired/Wireless receiving board)
4-1-1 Name and function of each part for the wired remote controller
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Temperature adjustment
buttons
On Timer button
Off Timer button
Test button
BUTTON NAME
On/OFF & Timer
Set/Cancle
Temperature adujustment
(..., †)
On Timer
Off Timer
Test
Mode Selection
Filter Reset
Fan Speed
Flow Direction
Samsung Electronics
Operating mode
Removing frost indicator
Mode selection button
• Start and stop of operation
- To toggle the operation On and Off.
• When making the reservation
- The reservation time can be set or canceled when pushing the Timer Set/ Cancel button
after adjusting the reservation time with On Timer or Off Timer.
• To increase (...) or decrease (†) the desired temperature.
• One cycle or continuous operation is available.
• To increase the On reservation time
• One cycle or continuous operation is available.
• To increase the Off reservation time
• One cycle or continuous operation is available.
• Pressing the key for more than 3 seconds with the SET off starts the initial operation (forced
cooling operation for 3 minutes).
• To rotate in the order of AUTO → Cooling → Dehumidifying → Blowing → heating.
• When the filter sign display starts to show the replacement time of filter of indoor unit,
pressing the key after cleaning the filter resets the filter sign.
• The wind mode to rotate in the order of wind select button, Breeze → Weak → Strong →
Wind auto → Breeze.
• The blades ard moving between up and down.
Centralized controller indicator
(In case of installing the Centralized controller)
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed
adjustment button
Swing button
Filter Reset button
FUNCTION
4-1