Error Messages; Specifications - Insignia NS-CADVD User Manual

Error messages

Message
WRONG REGIONAL DISC
WRONG PASSWORD
WRONG DISC

Specifications

Playable discs
Color system
Audio system
Signal output
Frequency response
S/N ratio
THD
Output terminals
Power supply
Operating temperature
Dimensions
Weight
Accessories
• Remote control
• A/V cable
• AAA batteries (2)
• User guide
12
Explanation
The DVD's region code does not
match your player's region code. The
disc's region should be on the disc
or the disc packaging. The region
code for your player is 1.
The DVD's rating is higher than the
rating level your player is set up to
play.
You may have entered to password
incorrectly in the SETUP menu.
Your player has automatic disc
quality detection software. When
your player detects a problem with a
disc, your player may keep playing
the disc at a lower quality or stop
playing.
CD, DVD, MP3, and JPEG
NTSC, PAL, AUTO
Analog stereo
Dolby Digital
Audio DAC 24-bit at 96 KHz
Video: 1 vpp at 75 ohm
Audio: 2 vpp stereo
CD: 20 Hz-20 KHz (EIAT)
DVD: 20 Hz-22KHz (48 K)
20 Hz-44 KHz (96 K)
> 90 dB
< 0.05%
Composite video
S-Video
Component video
Audio left and right
Coaxial digital optical 5.1 channels
AC 110 V at 60 Hz
< 15 W
32°F to 104°F (0°C to 40°C)
16.93 × 9.84 × 1.5 inches
(43 × 25 × 3.8 cm)
4.87 lbs. (2.21 kg)
www.insignia-products.com
Insignia NS-CADVD DVD Player
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within
the limits for a class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for
help.
FCC warning
Changes or modifications not expressly approved by the
party responsible for compliance with the FCC Rules could
void the user's authority to operate this equipment.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of
the FCC, requirements and compliance with safety
performance of the U.S. Department of Health and Human
Services, and also with FDA Radiation Performance
Standards 21 CFR Subchapter J.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian
ICES-003.
Dolby Laboratories
This product incorporates copyright protection technology
that is protected by method claims of certain US patents and
other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the symbol are registered trademarks of DOLBY
LABORATORIES. All rights reserved.