Samsung ASA24C5 Service Manual page 19

Operating Instructions and Installation
3-2-2(f) Flare Modification
• Tools used
Flare modification procedure
1) Cut the pipe using a pipe cutter.
90
3) Insert a flare nut into the pipe and
modify flare.
3-10
Oblique Raughness Burr
2) Remove burrs at the tip of the pipe cut.
Caution : Burrs not removed may result in
leakage of gas.
D
D
Outer diameter
A
A
* Unproper flaring
Inclined Surface
damaged
Pipe
Reamer
A(mm)
ø6.35mm 1.3
ø9.52mm 1.8
ø12.7mm 2.0
ø15.8mm 2.2
Cracked Uneven
thickness
Samsung Electronics