Connecting To A Personal Computer - Yamaha YPP-200 Ligh Piano Owner's Manual

Using the MIDI Functions

Connecting to a Personal Computer

access to a wide variety of music software.
terminals of the personal computer and the YPP-200.
Use only special MIDI cables when connecting MIDI devices.
G Connect the MIDI terminals of the YPP-200 to the MIDI terminals of the per-
G When using a MIDI interface with a Macintosh series computer, connect the
G When connecting to a computer with a USB interface, use the Yamaha UX256
36
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
YPP-200
By connecting your YPP-200's MIDI terminals to a personal computer, you can have
When using a MIDI interface device installed in the personal computer, connect the MIDI
sonal computer.
Computer
(sequencer software)
• When connecting the YPP-200 to a personal computer, first turn the power to both the YPP-200 and
the computer OFF before connecting the cable. After connecting the cable, turn the power to the
computer on first, then turn on the YPP-200.
RS-422 terminal of the computer (modem or printer terminal) to the MIDI
interface, as shown in the diagram below.
Computer
(sequencer software)
• When using a Macintosh series computer, set the MIDI interface clock setting in the application
software to match the setting of the MIDI interface you are using. For details, refer to the owner's
manual for the software you are using.
USB/MIDI Interface. Connect the UX256 and the computer with a standard
USB cable, then make the proper MIDI connections between the YPP-200 and
the UX256.
Computer
(sequencer software)
MIDI OUT MIDI IN
MIDI IN MIDI OUT
MIDI Interface
MIDI IN
RS-422
MIDI OUT
UX 256
MIDI IN
USB Cable
MIDI OUT
USB Cable
YPP-200
YPP-200
YPP-200