7. Level 2 Repair
5
1) Assemble PBA and Front Ass'y
※ Caution
1) Assemble following boss hole on the bracket.
2) Check 3*4 Keypad assembled at the right place.
7
1) Assemble Rear.
※ Caution
1) Be careful Volume Key & SPK module
assembled at the right place.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Assemble LCD FPCB connector.
※ Caution
1) Check Receiver fully settled down in the
Bracket.
8
1) Screw 7 points.
※ Caution
1) Torque : 1.1±0.1 kgf.cm
7-4