8-3-2. Initial
Initial Failure
Check R207 (RST_BB) > 1.7V?
using the oscilloscope
Check UCP200 pin D2 >
(TP: HEA400 9pin)
Check the 16bit data signals are correct.
Yes
Yes
1.7V ?
Yes
Yes
END
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
No
It must be higher than 1.7V.
No
8-9
Level 3 Repair
Resolder the R208.
Change the UCP200.