8-3-5. Microphone Part
Microphone does not work
Check R432 = 2.2V
at Mic Active?
Check the MIC signal paths.
MIC signals are on.
(TP : L403,L410,C422,
C420,R432,R435,R437)
Check the MIC is demaged.
Yes
Yes
Yes
Yes
END
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
No
Replace the UCP200 using a Heatgun
(Because of not soldering well)
Resolder L403, L410, C422, C420, R432, R435,
No
(not work if those is not connected.)
No
Replace an another MIC
8-15
Level 3 Repair
R437