Options - Icom IC-F8100 Instruction Manual
Hf transceiver
Hide thumbs
Also See for IC-F8100:
- Service manual (80 pages) ,
- Instruction manual (72 pages) ,
- Manual (3 pages)
Table of Contents
Advertisement
AT-140
automatic antenna tuner
Antenna and control cable receptacles
for easy installation and tuner through
function are available.
OPC-2142
shielded control cable
The shielded control cable protects the
transceiver from RF feedback and ex-
tends the separation between the AT-140
and the transceiver up to 10 meters.
OPC-2142: 4 pin
OPC-2143
shielded control cable
The shielded control cable protects the
transceiver from RF feedback and ex-
tends the separation between the AT230
and the transceiver up to 5 meters.
OPC-2205
shielded control cable
The shielded control cable protects the
transceiver from RF feedback and con-
nects the AT-140 or a GPS receiver to the
transceiver.
Recommended Automatic tuning antenna, AT230 from Moonraker Australia Pty. Limited
The AT230 is a 2.6 m length mobile whip antenna with an automatic tuning function. The antenna
matches 2–30 MHz continuously. Use the optional OPC-2143 cable for use with the IC-F8100.
Ask your dealer for details.
SP-10
external speaker
SP-25
external speaker
SP-30
external speaker
The SP-25 is the same as that supplied
with the IC-F8100. A mounting bracket is
supplied with the speaker.
Maximum AF input/impedance: 6 W/4 Ω
HM-193
hand microphone
Same as supplied with the IC-F8100 One
package type or Separated Type.
HM-192
remote control microphone
Same that as supplied with the IC-F8100
Remote control microphone type.
Allows you to remotely control the trans-
ceiver with the microphone. The HM-193
requires either the OPC-607, OPC-608,
OPC-609 or OPC-726 separation cable.
AD-119
junction box
Allows you to connect the AT-140, AT230
external modem or PC to the trans-
ceiver.
MB-126
mounting bracket
CFU-F8100
cooling fan
OPTIONS
RMK-6
separation kit
The same as that supplied with the IC-
F8100 Separated Type).
Allows you to install the transceiver Front
panel separate from the Main unit for op-
erating convenience. The RMK-6 requires
either the OPC-607, OPC-608, OPC-609
or OPC-726 separation cable.
OPC-607/OPC-608/OPC-609/OPC-726
separation cable
OPC-607
: 3 m
OPC-608
: 8 m
OPC-609
: 1.9 m
OPC-726
: 5 m
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
62
Advertisement
Table of Contents
