Icom IC-F8100 Instruction Manual page 24

4
SELCALL/ALE OPERATION
ï Phone call
Allows you to make Phone calls through a telephone
interconnect service provider.
• Preparation for Phone call
Sending a Channel Test call on several Phone call
channels, and check the propagation on each channel
to select the channel of good signal quality. (p. 30)
• Sending Phone call
q On the Memory Channel display, push
the Call select menu
w Push t or u
[ ](§) [
CALL," then push
e Push t or u
[ ](§) [
"PHONE."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND PO-
SITION," "GET POSITION," "GET STATUS," "EMER-
GENCY" and "CHANNEL TEST" are selectable.
r Push to go to the next screen.
[ ]
• Push [HOME] to return to the previous screen.
❍ Phone number input
Push the numeric keys to enter the Phone num-
ber.
• Push [8] to delete the number.
• This Number is not stored in the Phone address list.
❍ Phone address selection
Push [List]
➥
mode.
Push t
[ ](§)
➥
dress.
• Push [Edit](§ § ) to return to the direct input
mode.
21
[
.
to select the Call to "SEL-
](§§§)
the Selcall menu.
[ ] to enter
to select the Call type to
](§§§)
to enter the list selection
(§ § )
or u to select the Phone ad-
[ ](§§§)
t Push
[
• Push [HOME] to return to the previous screen.
❍ Phone Link selection
Push
] to enter
❍ Phone Link input
Push [Edit]
➥
Push the numeric keys to enter the Phone
➥
Link.
• Push [8] to delete the number.
• This Phone Link is not stored in the Phone Link
list.
• Push [List](§ § ) to return to the list selection
mode.
y Push
[
• Push [HOME] to return to the previous screen.
❍ Network selection
Push
u Push
[
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push
❍ Self ID input
Push [Edit]
➥
Push the numeric keys to enter the Self ID.
➥
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID
list.
• Push [List](§ § ) to return to the list selection
mode.
to go to the next screen.
]
t or u to select the Network.
[ ](§) [ ](§§§)
to enter the direct input mode.
(§§)
to go to the next screen.
]
t or u to select the Network.
[ ](§) [ ](§§§)
to go to the next screen.
]
t or u to select the Self ID.
[ ](§) [ ](§§§)
to enter the direct input mode.
(§§)