Squelch Level - Icom IC-F8100 Instruction Manual

Squelch Level

Adjust the squelch threshold level between 0 and 50,
in 1 digit steps.
When the S-meter squelch is activated, only signals
stronger than this set level are received.
Noise Blanker
Turns the noise blanker function ON or OFF.
The Noise Blanker function eliminates pulse-type
noise such as car ignitions.
Blanker Level*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
Adjust the Noise blanker level between 0 and 15 in 1
digit steps.
The set level is effective when the Noise Blanker is
activated.
AGC*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
Set the Automatic gain control settings to FAST,
SLOW or AUTO.
Bandwidth*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
Set the IF filter passband width to NARROW, MID or
WIDE.
Clarifier*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
Set the Clarifier function capability ON or OFF.
When this setting is ON, push [CLAR](7) to turn ON the
Clarifier function in the VFO/Memory Channel display.
Pre Amp*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
Set the receiver Preamplifier function ON or OFF.
When receiving a week signal, turn ON this item.
* When the Advanced User Menu in the Admin Menu is set to OFF, these items are not displayed. In this case, only the LCD
Contrast, LCD Dimmer, Backlight, BEEP Level, Squelch Level, Noise Blanker, RF Power and Mic Gain values can be adjust-
ed, or the settings selected.
(Default: 10)
(Default: OFF)
(Default: 10)
(Default: AUTO)
(Default: WIDE)
(Default: OFF)
(Default: ON)
5
MENU SCREEN
36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17