MTD 240 Series Operator's Manual page 7

6. Squeeze the tine clutch control inward.
Insert right end into the hole on the right side
of the upper handle, Figure 3-5.
Figure 3-5: Install right end of tine clutch control.
7
3
Assembly
Stand behind the tiller
as if you were going to
operate it. Your right hand
corresponds to the right
side of the tiller; your left
hand corresponds to the
left side of the tiller.
This operator's manual
may cover various models
of tillers. The units il-
lustrated may vary slightly
from your unit.