Table of Contents
Advertisement
GB
Controls and Menus
1. The LCD display has a Standby light to show there is power.
Switching into/from standby mode
The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched
off but is still receiving mains power.
● To turn the monitor into standby mode, press the
The blue power indicator illuminates more brightly.
● To turn the monitor ON from standby mode, press any of the
4
5, 6
following buttons:
,
If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
Control buttons (bottom edge of cabinet)
2.
Menu/F button:
rotate between volume, Brightness, contrast,
colour, sharpness and OSD language.
Input/ OK button: s
witch between TV, AV1, RGB, AV2, AV3, DVI
and PC mode.
e d
buttons:
provide up and down adjustments
4 button:
To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply)
Many of your monitors functions are controlled through the menu
function.
INST
INST
1
2
4
button.
or 0-9 buttons.
ALLA
TION
ALLA
TION
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. Skin
Text Brightness
Sound
Volume
Balance
Bass
Treble
Preset
Surround
OSD Language
Timer
Text Language
AV2 setting
During menu operation the bottom of the
which controls can be used.
Press the MENU button to enter the main menu.
A sub menu is selected using the e or d button and pressing the
8 button when the required sub menu is highlighted.
When you have
finished
then the MENU button again to exit the main menu.
Main Menu
Picture
Sound
Setting
: Select
Picture
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. skin tone
Text Brightness
: Select
1. Press the MENU button. Select Picture using the e or d button.
Press the 8 button to enter.
Set the picture settings for your "personal" preference.
2. Use the e or d button to select eg. Brightness and the 7 or 8
button to adjust levels.
3. Preset : You can select either your "Personal" settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture 'noise'
(granular appearance) being experienced by Using 7 or 8 to select
between Mid / Max / Auto / OFF /Min.
5. Dynamic skin tone: May be used to enhance skin tone by Using
7 or 8 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by Using 7 or 8 button to
select between Min / Mid / Max.
Press the MENU to return to Main Menu. These settings
automatically store when you exit the menu.
Press the MENU button to exit menu.
✐ Your personal settings are automatically saved when you exit the
menu.
Menu Operation
Personal / Dynamic / Standard / Eco
Min/ Mid / Max / Auto / OFF
Tone
ON / OFF
Min/ Mid / Max
Personal /Talk/ Music/ Normal
Mid / Max / OFF
Off Timer
OFF/ 5-120 mins
Greek/ East/ West/ Cyrillic
RGB, H/V / Y Pb Pr
on screen display
you can press the MENU button to exit,
: Adjust
MENU
Picture menu
Personal / Dynamic / Standard / ECO
Mid / Max / Auto /
Min
ON / OFF
Min / Mid / Max
: Adjust
MENU
GB
will show
: Exit
/ OFF
: Back
6
Advertisement
Table of Contents
