Picture Menu; Menu Operation - Sanyo CE42LM4WPN-NA - CE - 42" LCD Flat Panel Display Instruction Manual

Terminals
1. The LCD display will have a Standby light to show there is power.
2. Control buttons (bottom edge of cabinet)
Menu/F button:
rotate between contrast, Brightness, color and
sharpness
Input/OK button: s
witch between AV1, RGB, AV2, AV3, HDMI
and PC mode.
e d
buttons:
adjust Menu/F options
4 button:
To switch from display to standby mode (to switch off
completely disconnect the monitor from the power supply)

Menu Operation

Many of your monitors functions are controlled through the menu
function.
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. Skin Tone
Text Brightness
Child lock
Timer
AV2 setting
INST
INST
1
2
Personal / Dynamic / Standard / Eco
Mid / Max / Auto / OFF / Min
ON / OFF
Max / Mid / Min
OFF / ON
Off Time ON / OFF
RGB, H/V / Y Pb Pr
ALLA TION
ALLA TION
During menu operation, the bottom of the screen will show which
controls can be used.
Press the u button to enter the main menu.
Main Menu
Picture
Setting
: Select
A sub menu is selected using the e or d button and pressing the
8 button when the required sub menu is highlighted.
When you have set a Sub menu you can press the MENU button to
exit, then the MENU button again to exit the main menu.
Picture
Brightness
Contrast
Color
Sharpness
Preset
Noise Reduction
Dyn. skin tone
Text Brightness
: Select
1. Press the MENU button. Select Picture using the e or d button.
Press the 8 button to enter.
Set the picture settings for your "personal" preference.
2. Use the e or d button to select e.g. Brightness and the 7 or 8
button to adjust levels.
3. Preset : You can select either your "Personal" settings, or
Dynamic, Standard or Eco settings.
4. Noise Reduction: May be used to reduce any local picture 'noise'
(granular appearance) being experienced by Using 7 or 8 to select
between Mid / High / Auto / Low / OFF.
5. Dynamic skin tone: May be used to enhance skin tone by using
7 or 8 to select between On / Off.
Tint : is only available if NTSC equipment is connected.
6. Text Brightness: May be adjusted by Using 7 or 8 button to
select between Min / Mid / Max.
To exit press the MENU button.
Your personal settings are automatically saved when you exit the
menu.
: Adjust
MENU

Picture menu

Personal / Dynamic / Standard / ECO
Mid / Max / Auto / Min
ON / OFF
Min / Mid / Max
: Adjust
MENU
: Exit
/ OFF
: Back
5