Cleaning Brush Roll, Hose And Wheels - Electrolux ZB2932 Instructions Manual

8 Cleaning / /
Cleaning the brush roll with the BRUSHROLLCLEAN™ function* / BRUSHROLLCLEAN™
BRUSHROLLCLEAN™
The brush roll, the hose and the wheels may need to
be cleaned if they become blocked or jammed for any
reason.
Some Ergorapido models are equipped with
BRUSH CLEAN™ – a brush cleaning function that
helps to keep a clean brush easily.
Please note that the BRUSH CLEAN™ function
might not be able to remove thick threads, wires or
thick carpet fibres caught in the brush roll.
It is recommended to use this function once a week.
For best results use the BRUSH CLEAN™ function
when the Ergorapido is fully charged.
BRUSH
BRUSH CLEAN™
BRUSH
BRUSH
Ergorapido
BRUSH CLEAN™
BRUSH CLEAN™
Ergorapido
* ZB2932, ZB2933, ZB2934, ZB2935, ZB2941, ZB2942, ZB2943
1. Make sure the cleaner is switched on and
stands on hard even surface. Do not use the
CLEAN™
BRUSH CLEAN™ function on deep carpets or
long haired rugs.
1.
CLEAN™
BRUSH CLEAN™
1.
CLEAN™
BRUSH CLEAN™
2. Press the BRUSH CLEAN™ button with your
foot while the cleaner is switched on. Hold for
ca. 5 seconds or until all dirt and hair is removed.
Release the button.
During BRUSH CLEAN™ use the sound level
will be increased which is normal.
2. BRUSH CLEAN™
BRUSH CLEAN™
2.
BRUSH CLEAN™
BRUSH CLEAN™
/