Electrolux ZB2932 Instructions Manual page 9

Cleaning the brush roll with the BRUSHROLLCLEAN™ function* / BRUSHROLLCLEAN™
BRUSHROLLCLEAN™
The BRUSH CLEAN™ function is equipped with
an overheating protection. It will deactivate the
brush roll if the BRUSH CLEAN™ function has
been activated for more than 30 sec (constant or
interrupted) within one discharging period.
BRUSH CLEAN™
BRUSH CLEAN™
BRUSH CLEAN™
BRUSH
When the button is released, the brush is rotating and the nozzle front lights are on again. You can continue to
use the Ergorapido for vacuuming as usual. The BRUSH
Ergorapido must be charged continuously for at least 10 minutes in the charging stand.
BRUSH CLEAN™
* ZB2932, ZB2933, ZB2934, ZB2935, ZB2941, ZB2942, ZB2943
1. Ergorapido plus:
If - while holding the BRUSH
pressed down – the brush stops rotating, the
nozzle front lights -switch off and the battery
indicator light blinks red and blue, release the
BRUSH CLEAN™ button.
1.
BRUSH CLEAN™
BRUSH
1.
BRUSH
CLEAN™
CLEAN™ function will remain disabled. To reset, the
BRUSH CLEAN™
Ergorapido
2. Ergorapido:
CLEAN™ button
2.
CLEAN™
2.
CLEAN™
BRUSH CLEAN™
Ergorapido
Cleaning /
If - while holding the BRUSH CLEAN™ button
pressed down – the brush stops rotating and
the nozzle front lights switch off, release the
BRUSH CLEAN™ button.
BRUSH CLEAN™
BRUSH CLEAN™
BRUSH CLEAN™
BRUSH CLEAN™
9
/
/
GB
KOR
CHS
CHT
THA
IND
VIE