Glass Frame Removal And Installation - Travis Industries 564 SS GreenSmart 2 Owner's Manual

Fireplace
Hide thumbs Also See for 564 SS GreenSmart 2:
Table of Contents

Advertisement

Glass Frame Removal and Installation

Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Based upon the face being used, either:
a
(a) swing the access door down and remove the top grill,
(b) remove the face (unscrew or lift off - see the instructions
included with the face for details).
Open the four latches holding the glass frame in place (start
with the bottom) - follow the directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it
should be flush with the front of the fireplace when installed.
© Travis Industries
Maintenance
Latch
NOTE:
You may need to lift
Catch
the glass frame
(on glass frame)
while re-attaching.
4121120
15
Top of
Firebox
Glass
100-01308

Advertisement

Table of Contents
loading

Table of Contents