Mode-Dial-Light Indicator Status - Kodak EasyShare Z612 User Manual

Zoom digital camera
Hide thumbs Also See for EasyShare Z612:
Table of Contents

Advertisement

If...
Picture is too light
or overexposed
Picture is not clear

Mode-dial-light indicator status

If...
Mode dial light
does not turn on
and the camera
does not work
Mode dial light
blinks
Mode dial light
glows steady
www.kodak.com/go/support
Try one or more of the following
I
Reposition camera to reduce the amount of available light.
I
Turn flash off
(page
I
Move so that the distance between you and the subject is within the
effective flash range
I
To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator is green, press the Shutter
button completely down to take the picture.
I
Use P mode to adjust the exposure compensation.
I
To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator is green, press the Shutter
button completely down to take the picture.
I
Clean the lens
I
Make sure camera is not in Macro AF mode if you are more than
24 in. (61 cm) from your subject.
I
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
Try one or more of the following
I
Turn on the camera
I
Recharge the battery or install a new one
I
Camera may have turned off automatically. Turn on the camera and
change the auto power-off setting (see
I
Picture is being processed and saved to the camera. Camera is
operating normally.
I
Camera is connected. Camera is operating normally.
I
Recharge the battery or install a new one
I
Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.
I
Camera is operating normally.
13).
(page
13).
(page
71).
(page
3).
Troubleshooting
(page
2).
page
36).
(page
2).
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents