Kodak EasyShare Z612 User Manual page 61

If...
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message
appears on EVF/LCD
screen
Memory card not
recognized or camera
freezes with card.
www.kodak.com/go/support
Try one or more of the following
I
Delete some or all pictures and videos in the storage location
(page 14).
I
Transfer pictures and videos to the computer
pictures and videos in the storage location
I
Insert a memory card
location, if necessary (see table on
I
Make sure the correct battery type is loaded
I
Wipe the contacts with a clean, dry cloth
a battery in the camera.
I
Insert a new or charged battery
I
Turn the camera off, then on again. Make sure the camera is not in
Favorites mode.
I
Depress shutter button completely down
I
Insert a new or charged battery
I
Memory full. Transfer pictures to the computer
pictures from the camera
location, or insert a new card.
I
Wait until processing or saving function e.g., bursts, video, edits,
formatting, and deleting is complete
I
Turn the camera off.
I
Remove memory card from the camera.
I
Remove the battery and wipe the contacts with a clean, dry cloth
(page 71).
I
Insert a new or charged battery
I
If all else fails, get customer support help
I
Card may be corrupted. Format card in camera (see table on
page 36).
I
Use another memory card.
(page 4), then change the image storage
page 32).
(page
(page 2).
(page 2).
(page 14), change image storage
(page 2).
Troubleshooting
(page 16), then delete
(page 14).
(page 2).
69) before inserting
(page 5).
(page 16), delete
(page 59).
55